Principales caractéristiques
1. Gather the tools: Make sure you have the necessary tools for replacement, including a heat gun or hair dryer, suction cup, plastic prying tools, tweezers, and a set of Phillips screwdrivers.2. Power off and disassemble: Power off the device completely and remove the SIM card tray. Use a heat gun or hair dryer to gently heat the edges of the device to soften the adhesive.3. Separate the back cover: Once the adhesive has softened, carefully insert a plastic pry bar between the back cover and the device frame. Slowly work your way around the edges to separate the back cover from the rest of the device. Be careful not to damage the cables or components inside.4. Disconnect the battery: Once the back cover is removed, locate the battery connector and disconnect it to avoid any short circuits during the replacement process.5. Remove components: Carefully remove any components or cables blocking access to the LCD display assembly, including the motherboard, speaker, and other components if necessary.6. Remove the LCD screen assembly: Unscrew all the screws securing the LCD screen assembly to the device frame. Use a plastic prying tool to gently separate the LCD screen assembly from the frame. Be careful of any adhesive or cable that may still be attached.7. Install the new LCD screen: Place the new LCD screen assembly in position and replace any screws or cables that were removed during disassembly.8. Reassemble the device: Reconnect the battery connector and carefully reassemble the device by following the disassembly steps in reverse order.9. Functionality Test: Before completely reassembling the device, turn it on and test the new LCD screen to ensure it is working properly.10. Finalize Reassembly: Once you have confirmed that the new LCD screen is working properly, complete the reassembly process by securing the back cover to the device with adhesive or screws.